Saturday, 30 November 2013

The Gritty Bits

A bit delayed but I've moved the new battalion on to the next basing step. A full covering of sand, stuck down with more wood glue, added to with some cork rocks and.. loose leaf dried tea straight from the packet. This is a hardy basing material with a coarser granularity than sand, and I find it works very well for generic grass/vegetation. I guess the only tip is to avoid immersing your bases in boiling water at any point in the future!


Next up, once the glue has dried, a coat of black to seal it all in.
In the meantime though, it's back to the cuirassiers I've been painting, and which will get a post of their own soon..

Wednesday, 27 November 2013

Two basing stages done

The Vantua Regiment have now been formed up and are going through the phases to match the basing style I use for my 18th century forces. First up they go onto 50x50mm (sorry Iain!) laser cut mdf bases from Warbases. This might seem the easiest part but actually it's a a challenge getting them lined up perfectly both within a single base and as a unit overall. This involves a lot of squinting and minute adjustments - which has to be done before the glue dries! With Old School style Lace Wars units I think it's important to achieve a formal regimented look where possible and these Huzzah! figures look their best when neatly aligned. Frederick would approve :)

Actually, as a pre-stage 1 activity I sealed the bases first with a slightly watered-down coat of wood glue (I believe PVA shrinks a little as it dries so I avoid it now for basing) so that the bases wouldn't warp later. You never know if this will be 100% successful until a bit of time has passed, but hopefully they'll stand up to the rest of the basing and painting process.

Once the figures were in place I (carefully!) applied a layer of ready-mixed filler all around the figure bases to bring the ground level up to a consistent height. While they are drying I've taken some quick pics (below). Next up comes the really messy bit - applying a layer of sand. I used to stick this down with nice thick black masonry paint (and still do on the odd ocassion where I'm basing unpainted figures) but as you can imagine, one accidental swipe of the brush and that's a lot of re-painting to do! Nowadays it's clear PVA or wood glue as a damage limitation tactic. I hope to get this stage done tomorrow.

In the meantime:







Tuesday, 19 November 2013

Re-organisation, with a little help from Sweden

I did some rationalisation of my hobby storage at the end of the summer, and made some decent progress in the face of the challenge of new stuff regularly being added. Getting into 28mm in the last couple of years has brought with it a serious volume problem in terms of storing the figures and scenery. So, a decent amount of stuff got thrown out or moved to the garage, and drawer and cupboard space was rationalised to provide me with some room to expand into again. The next issue will be the new terrain boards I'm planning and although they're only 1 foot square they will soon eat up space.

This made my remaining task to equip the games room's wall cupboard with more capacity, which would be courtesy of an IKEA bookcase from the good old Billy range. Naturally this resulted in a delay to the project as a trip to the massive human processing plant that is an IKEA store wasn't something I was looking forward to! This Sunday just gone was the day however. Despite not having darkened their door in the best part of a decade it was everything I expected, but we actually did quite well and dashed round averting our eyes from the endless stuff-you-don't-need-but-might-as-well-buy-now-you're-here on display.

Once we'd escaped from the carpark of eternal despair and made it home, I cracked on and assembled the unit (which I admit was a very simple process due to the quality of the design and components), which is 40cm wide and 2m tall. It fits in sideways alongside the wider unit of the same style I already have in there and after an hour of shifting everything out, and then back in, I have my new terrain storage in place and less unwanted stuff in the rest of the games room, sorry - office.

Pics of a cupboard are tricky due to the light, and not that thrilling due to the subject, but it's a blog so here goes:



Monday, 18 November 2013

At last..

.. I've finally finished the next battalion of 28mm musketeers for my mid-18th Medetian century army. Why is this a big deal? Because I started them in July and frustratingly ground to a halt a few weeks ago, despite being within sight of the end. This created something of a self-induced painter's block as I was determined to finish them before painting anything else.

Although these Huzzah! Miniatures figures (from Fighting15s) don't perhaps have as much detail as some, the uniforms of the day still make them a challenge to paint en-masse. 30 figures is a lot for me in one go, and I'm not the quickest, so units of this size require a fairly big investment of time. Seeing them ready for the table is, of course, the reward - so I need to crack on and get them based now (and add a standard). In truth, I'm also intending to add a battalion gun and a grenadier company, but psychologically it's important to tell myself the unit is 'done'!

In the meantime, here are the newly raised Vantua Regiment who will soon be formed up in close order ready to march off to join their comrades in the (slowly) growing Medetian army.



 
The lighting isn't great today as one of my spotlights has failed and it's very dull outside!

Sunday, 10 November 2013

A new bit of scenery

I'm never one to pass up a good quality piece of scenery at a show, although I can't for the life of me recall when I bought this one, or who makes it! The cave/mine entrance is a favourite for Hordes of the Things players, and although that's not a ruleset I use for my 15mm fantasy games, I like this model and its handy space for a 40mm wide element in front of the entrance for a dramatic defence or the arrival of horde reinforcements.

The only modification I made before painting it was to add sand to the flat entrance way and around the edges of the base, to allow me to blend it in better with my terrain boards. A black undercoat was then followed with a few successively lighter layers of grey, and some brown for the ground, and voila, a nice new piece of scenery to go on a board edge for my next game with Orcs or Dwarves.

Before and after pics (I guess it doesn't look that different but some effort Did go in, honest!)